Case 435 Skid Steer Loader

Show All

Detail:

Enclosed Cab with Heat. 2-Speed, Good Tires, 72" Bucket, Standard Flow Aux. Hydraulics. Nice Machine.

Enter the destination zip code

Send »

Angle of Departure	29 deg
Bucket Capacity - Heaped	13.9 cft
Bucket Range (Capacity)	13.9 - 32.5
Bucket Rollback (Carry)	N/A
Bucket Rollback (Full Height)	92 deg
Bucket Rollback (Groundline)	27 deg
Bucket Type	Dirt
Bucket Width	73 in
Clearance Circle Front (w/Bkt)	79.5 in
Clearance Circle Rear	60.8 in
Cooling (Liquid/Air)	Liquid
Cycle Time (Dump)	1.3 sec
Cycle Time (Lower)	3.4 sec
Cycle Time (Raise)	4.2 sec
Cycle Time (Retract)	1.7 sec
Cylinders	4
Displacement	195
Dump Angle	43 deg
Dump Height	91.6 in
Dump Reach	27.5 in
Engine	432T/M3
Engine Manufacturer	Case
Engine Torque @ RPM	229 @ 1,400 flb
Fuel Tank Capacity	17.3 gal
Gross HP	82
Ground Clearance	9.3 in
Height to Hinge Pin	120 in
Height to ROPS	83.2 in
Hydraulic Pump Flow (Hi-Flow)	33.2 gpm
Hydraulic Pump Flow (Standard)	23.8 gpm
Hydraulic Pump Type	Piston
Hydraulic System Capacity	11 gal
Hydraulic Tank Capacity	5.7 gal
Length Less Bucket	104.5 in
Length With Bucket (Dig/Carry)	131.3 in
Lift Arm Breakout Force	6,300 lbs
Maximum Operating Height	153.4 in
Net Horsepower	77
Number of Speeds	Variable
Operating Capacity (SAE)	2,200 lbs
Operating Weight	6,780 lbs
Operator Protection	ROPS/FOPS
Power Mode	Diesel
Rated RPM	2,300
Relief Pressure (Hi-Flow)	N/A
Relief Pressure (Std Flow)	3,050 psi
Tilt Breakout Force	4,400 lbs
Tipping Load (SAE)	4,400 lbs
Tire Size	12.00 X 16.5
Total Cycle Time	10.6 sec
Transmission	Hydrostatic
Travel Speed	7 mph
Tread Width	59.9 in
Wheelbase	44.9 in
Width Less Bucket	72 in


Condition Report Key 5 = Limited use or recently replaced, free of visible wear or defects 4 = Performs within the tolerances expected for age and type of item 3 = Although performing, shows indication of needing repair or replacement 2 = Requires work to perform as expected. 1 = Needs immediate repair/replacement.